"To Measure Is To Know"

AdCom

Richard Hochberg Headshot Photo
Richard
Hochberg
Lanmark Technologies
rhochberg@ieee.org
+1 (703) 627-3343
I&M AdCom (2013-2016)

Richard C. Hochberg (SM’88; Fellow’07), earned his Ph.D. in electrical and computer engineering at Kansas State University, Manhattan Kansas, USA, with research interests in the areas of instrumentation and fiber optic sensors in 1987.

Alessandra
Flammini
University of Brescia
alessandra.flammini@ing.unibs.it
I&M AdCom (2013-2016)

Alessandra Flammini (M’98-SM’10) was born in Brescia, Italy, in 1960.

In 1985 she took her Laurea degree in Physics with honors at the University of Rome. Dr. Flammini is currently an Associate Professor of Electrical and Electronic Measurements at University of Brescia. Her current research interests include smart sensors, wireless sensor networks for industrial applications and metering, synchronization, Software Defined Radio, smart grids and power line communications.

Max Cortner Headshot Photo
Max
Cortner
max.cortner@bsci.com
Boston Scientific Corporation
651 582 4317
I&M AdCom (2010-2013); Associate EIC, I&M Magazine; Industry Relations Chair
651 582 7599
Ferdi Ponci Headshot Photo
Ferdinanda
Ponci
Aachen University
FPonci@eonerc.rwth-aachen.de
+49 (241) 804-9702
I&M AdCom (2010-2013); VP Education

Dr. Ferdinanda Ponci graduated from Politecnico di Milano (Italy) with a Master Degree in Electrical Engineering in 1998 and a Ph.D. degree in Electrical Engineering in 2002.

Dario Petri Headshot Photo
Dario
Petri
petri@disi.unitn.it
Dipartimento di Ingegneria e Scienza dell'Informazione, Universita' degli Studi di Trento
I&M AdCom (2011-2014); VP Conferences; TIM Associate Editor (2013-2014); Faculty Course Development Award Chair
+39-0461-283902
+39-0461-282093

Dario Petri received the M.Sc. degree (summa cum laude) and the Ph.D. degree in Electronics Engineering from the University of Padova, Italy, in 1986 and 1990, respectively. From 1990 to 1992 he was an assistant professor at the Department of “Electronics and Information Engineering” of the same University. In 1992 he joined the University of Perugia, Italy, as an associate professor. Then he has been elevated to full professorship of Measurement and Electronic Instrumentationin 1999.

Mark Yeary Headshot Photo
Mark
Yeary
University of Oklahoma, School of Electrical & Computer Engineering, Atmospheric Radar Research Center
yeary@ou.edu
I&M AdCom (2013-2016); TIM Associate Editor (2013-2014); Technical Committee Chair

Mark Yeary (S’95–M’00–SM’03) received the B.S. (honors), M.S., and Ph.D. degrees from the Department of Electrical Engineering, Texas A&M University (TAMU), College Station, in 1992, 1994, and 1999, respectively. Following his graduation in 1999, he was a member of the DSP group and a Lecturer with the Department of Electrical Engineering, TAMU, where he continued to lead a variety of industrially sponsored projects. Since the fall of 2002, he has been a faculty member in the Department of Electrical and Computer Engineering, University of Oklahoma, Norman.

Reza Zoughi Headshot Photo
Reza
Zoughi
zoughir@mst.edu
Schlumberger Endowed Professor of Electrical and Computer Engineering, Missouri University of Science and Technology, ECE Department
I&M AdCom (2010-2013); Executive Vice President; TIM Associate Editor (2013-2014)
+1 (573) 341-4656
+1-573-341-6671

R. Zoughi received his B.S.E.E, M.S.E.E, and Ph.D.

Jenny Wirandi Headshot Photo
Jenny
Wirandi
jenny.wirandi@okg.eon.se
Oskarshamn Nuclear Power Plant
I&M AdCom (2012-2015); Tutorials Chair
+46 491 78 61 85
+46 491 78 60 90

Jenny Wirandi received the B.Sc. degree in electrical engineering from the University of Kalmar, Kalmar, Sweden, in 1997 and the Ph.D. degree in electrical measurement from the Lund University, Lund, Sweden, in 2007. In 2007, she joined the Blekinge Institute of Technology, Karlskrona, Sweden as a post-doc. Since 2008 she has been a System Engineer at Oskarshamn Nuclear Power Plant, Oskarshamn, Sweden.

Wendy Van Moer Headshot Photo
Wendy
Van Moer
Vrije Universiteit Brussel
wendy.vanmoer@vub.ac.be
I&M AdCom (2012-2015); VP Publications; TIM Associate Editor (2013-2014)

Wendy Van Moer received the Engineer and Ph. D. degrees in applied sciences from the Vrije Universiteit Brussel (VUB), Brussels, Belgium, in 1997 and 2001, respectively. She is currently an Associate professor with the Electrical Measurement Department (ELEC), VUB. Her main research interests are nonlinear measurement and modeling techniques for medical and high-frequency applications. She was the recipient of the 2006 Outstanding Young Engineer Award from the IEEE Instrumentation and Measurement.

Michael Gard Headshot Photo
Michael
Gard
The Charles Machine Works
IandMMagazineEIC@ieee.org
(580) 572-3021
I&M AdCom (2011-2014); Editor-in-Chief, I&M Magazine; I2MTC Tutorials Chair; I2MTC Rep (2011-2013); Techncial Committee Chair

Michael F. Gard (SM ’84) was born in McPherson, KS in 1949.  He received the B.S. in Electrical Engineering (magna cum laude) from Kansas State University, Manhattan, KS in 1971, the M.S. in Electrical Engineering (Interdepartmental Program in Biomedical Engineering) from Washington University, St. Louis, MO in 1972, and the Ph.D. degree in Electrical Engineering with a minor in Geophysics from Southern Methodist University, Dallas, TX in 1992.

Connect with the I&M Society

I&M Logo

Click to Join I&M Society

LinkedIn

Technology Navigator